Request a quote
Request a Catalog

NOTE: You will need to be registered and logged in to an
account in order to participate in the forums.
Register | Login
CR Magnetics Forums
Forums > CRMagnetics Discussion Forums > Product Questions
DC Transducer
Last Post 04 Sep 2009 08:14 AM by Tony Hodges. 1 Replies.
Please login to post a reply.
Author Messages Informative
Tony Hodges
CRM Staff
New Member
New Member
Posts:49

--
04 Sep 2009 08:12 AM
We are considering using a DC
current sensor in an upcoming product for Solar Inverters.

Here are the requirements:
* Ability to sense DC current from 1 to 10A, with 5% or better
accuracy.
* Bandwidth from 0 to 10Hz.
* Must be able to withstand fault currents up to 300ADC.
* UL listed or recognized preferred.
* Operating range from -20 to 60C.

Tony Hodges
CRM Staff
New Member
New Member
Posts:49

--
04 Sep 2009 08:14 AM
Dear Sir,
Please review the spec sheet for our CR5200 Series. However, temp specs are a problem, these are based upon the accuracy of 1%. These should be able to operate -20 to 60 C and be within 5%. Accuracy is 1% 0 to 50C.
Please login to post a reply.

Powered by Active Forums
Visit Other Huntingon Electric Companies: Huntington Electric | Mills Resistor | Milwaukee Resistor | Central Resistor | XY Tool