Home
Site Map
Products
Distributors/Reps
Applications
Software/Links
Catalog
Contact Us
Request Quote
Search
    split core transducer
    Split Core Transducers
   
    DataView Series Displays
    TRANSDUCERS
    Split Core,
Current, Voltage, Power and Frequency
    HALL SENSORS
    Hall Effect DC Current Sensors
    PRODUCTS
    Main Selection Guide

 
 
Specifications | Parts & Ordering | Applications | Catalog Pages
The CR4110/20S Series provide True RMS sensing of the current waveform. True RMS is recommended when sensing current waveforms that are variable frequency, chopped up, or non-sinusoidal in general.

35mm DIN Rail or Panel Mount
Available with analog 4-20 ma or 0-5 Vdc outputs
24 Vdc powered
Use with external current transformers
Highest precision available
Connection diagram printed on case
Basic Accuracy: 1.0%
Calibration: True RMS Sensing, Average RMS, DC
Thermal Drift: 500 PPM/°C
Operating Temperature: 0°C to +60°C
Installation Category: CAT II
Polution Degree: 2
Insulation Voltage: 2500 Vdc
Altitude: 2000 meter max.
Frequency Range: DC, DC to 4KHZ, 20 Hz - 5 KHz
MTBF: Greater than 100 K hours
Cleaning: Water-dampened cloth
Supply Voltage: 24 Vdc ±10%
Output Load: 4-20 mA dc - 0 to 300 W, 0-5 Vdc - 2K W or Greater
Response Time: 250 ms max. 0-90% FS (0.25 ms for CR5410S)
Relative Humidity: 80% for temperatures up to 31°C and decreasing linearly to 50% at 40°C
Directly connect to PLC
Sense motor stalls and short circuits
Industrial instrumentation
Process control loops
Phase Fired Controlled Heaters
CR MAGNETICS, INC.
3500 Scarlet Oak Blvd, St. Louis, MO 63122 USA
Phone: 636.343.8518 Fax: 636.343.5119
Email: sales@crmagnetics.com
©2002 CR Magnetics, Inc.