CR5410S AC/DC Split-Core Hall Effect Current Transducer - with ± 5VAC/VDC Output

CR5410 Series AC/DC Hall Effect Current Transducers are designed to provide a bipolar output that proportionally reflects (traces) the waveform of the input current. These devices are specifically targeted to be used in applications where multi-mode current sensing is required.

*Custom ranges are non-cancelable and non-returnable*

CR5410S

Price: $303.21
  • CR5410S

Need a 24VDC Power Supply? Check out our CRPS Series!

NIST-CERTIFICATE OF CALIBRATION

- +

Features

  • +/-5 Vdc and +/-5 Vac outputs
  • 24 Vdc powered
  • Highest precision available
  • Connection diagram printed on case

Specifications

  • Basic Accuracy: 1.0%
  • Calibration: True RMS Sensing, DC
  • Thermal Drift: 500 PPM/°C
  • Operating Temperature: 0°C to +60°C
  • Installation Category: CAT II
  • Polution Degree: 2
  • Insulation Voltage: 2500 Vdc
  • Altitude: 2000 meter max.
  • Frequency Range: DC - 4 KHz 
  • MTBF: Greater than 100 K hours
  • Cleaning: Water-dampened cloth
  • Supply Voltage: 24 Vdc ±10%
  • Output Load: 2K Ω or Greater
  • Response Time: 0.25 ms max 
  • Relative Humidity: 80% for temperatures up to 31°C and decreasing linearly to 50% at 40°C

Applications

  • Inverter and multi-frequency drives
  • Multi-mode ground paths carrying both AC and DC Signals
  • Feed back loop building block
Click on Distributor's logo above to view product on their site.