CR5220 DC Hall Effect Current Transducer - with4~20mADC Output

CR5220 DC Current Sensing Transducers are designed to provide a DC signal which is proportional to a DC sensed current. These devices are designed for direct current only, targeting them towards general and daily applications. The ranges 2 to 20 Amp solid core versions, utilize an advanced Magnetic Modulator Technology. The ranges grater than 20Amps solid core version utilize Hall Effect Technology. All split core versions utilize Hall Effect Technology.

*Custom ranges are non-cancelable and non-returnable*

CR5220

Price: $175.08
  • CR5220

Need a 24VDC Power Supply? Check out our CRPS Series!

NIST-CERTIFICATE OF CALIBRATION

- +

Features

  • Closed loop sensing for accuracy
  • 35mm DIN rail or panel mount
  • Available with ±5 VDC, ±10 VDC or 4 - 20 mADC outputs
  • Non-contact DC current sensing
  • Connection diagram printed on case

Specifications

  • Basic Accuracy:........................1.0 %
  • Linearity:...................................  10% to 100%
  • FS Thermal Drift:............................500 PPM/°C   
  • Operating Temperature:............0°C to +50°C
  • Installation Category:................CAT II
  • Vibration Tested To:...................IEC 60068-2-6,1995
  • Pollution Degree:.....................2
  • Response Time: .....................250 ms
  • Altitude:...................................2000 meter max.
  • Insulation Voltage:...................2500 VDC
  • Supply Voltage:.......................24 VDC ±10%
  • Frequency Range:..................DC Only
  • Cleaning:................................Water-dampened cloth
  • MTBF:.........................  Greater than 100 K hours
  • Output Load:...............  4-20 mADC - 0 to  500 Ω0-5 VDC - 2K Ω or Greater
  • Relative Humidity:.....5% to 95%, Non-Condensing
  • Supply Current:
  • CR5210/11:...............Typical 35mA      Max 40mA
  • CR5210/11S:.............Typical 30mA      Max 35mA
  • CR5220:....................Typical 60mA      Max 100mA
  • CR5220S:..................Typical 40mA      Max 50mA
  • Torque Specs.:...........3.0 inch lbs. (0.4Nm)
  • Weight:.......................0.5 lbs.

Applications

  • Battery chargers and systems
  • DC motor drives
  • Power supply management
  • Mobile applications